Strap Hinge
Strap Hinge I have very thin doors (about an inch thick) and want to replace the hinges... any ideas? I live in an older house with interior doors that are an inch thick. They currently have str...
Strap Hinge
Understanding The Types Of Shutter Hardware
Replacing old and worn hardware around the home is an important preventative step against serious damage in the future. Hardware comes in all shapes and sizes and although it may not seem like it is in need of replacement or repair, it is important to check regularly. Remember that it is easier to replace a simple hinge than an entire door that has fallen off and become cracked in the process.
Window hardware is perhaps one of the most overlooked aspects of home maintenance because it is so small and easily taken for granted that it does not need regular maintenance. While it is true most hardware will serve for years without any outside assistance, it can be subject to some nasty variables that interior home hardware never faces such as heavy rains resulting in rust and heavy duty work holding up or open various components of the window, such as the shutters.
Shutters are a less frequently used element of architectural design today but most historical homes still utilize shutters for a variety of reasons including privacy, aesthetics and protection against severe weather. A shutter is constructed of a frame and traditionally has louvered (both vertical and horizontal) slats attached in the frame. These can be operational or non operational. Shutters are either mounted flush within the frame or offset and installed on the jamb itself.
Shutter Dogs
A shutter dog is a simple device used to hold shutters in the open position against the wall or face of the building. The shutter dog will be directly screwed into the exterior of the home and rotate (traditionally 90 degrees) into an upward position to hold the shutter open or horizontally to allow to shutters to close. The type of screw needed varies depending on the material it is mounted in and this can range from wood to stone to drywall.
Shutter Hinges
Most shutters utilize a strap hinge to compensate for the high weight. A strap hinge consists of a two long metal "straps" with one being directly attached to the moveable door and the other side attached into a stationary frame.
Shutter Bolt/Latch
As the name suggests a bolt or latch is designed to hold the shutters in a closed position. These traditionally have a two piece construction with one piece installed on either shutter. This may utilize a rotating latch or a sliding bolt.
Materials
Most shutter hardware is constructed from solid iron or brass – this ensures high quality materials that will not become damaged as easily over time. If the shutters are on the exterior of the home some damage will occur over time due to natural wear and tear and various weather elements.
Need further assistance? Check out LookInTheAttic & Company for more great tips and information!
About the Author
Kohn Coleman born in Michigan - received his Ph.D. from Iowa State University in 2000 - currently leads several online companies and ventures.